TeamKNOx WEB-Site

ThinkPad BIOS Password unlock
BIOS Password
Over view
Target
Hardware
Software
Instruction
Price
Order
How to support for not supported model
Attnetion
<< Return

    As view of recycling and ecology, we can not accept to dispose ThinkPad if we did not know contents of chip which cost is 40-50 cents ... We'd like to introduce password unlock system for this purpose.


  • BIOS Password

    ThinkPad has few types of password. Normal password is stored in Hard disk drive, that means you can re-use ThinkPad, if you replaced hard drive and re-install sytem. However, BIOS password is stored in non-volatile memory (EEPROM). You have to replace main board, if you lost this password...


  • Over view

    EEPROM-Reader/Writer 概略図

    Read out password from EEPROM via USB.


  • Target

    Target as below. (We can accept other model, if you want...)

    • ThinkPad X20, X21, X22, X30, R30, R32


  • Hardware

    USB 基板&アダプタケーブル アダプタケーブル

    This system is EEPROM reader with USB. Interface chip is EZ-USB(AN2131SC).


  • Software

    EEPROM-Reader/Writer

    Software part is two parts as USB Firmware and PC contorl software (Windows software)

    • Environment
      • Pentium II/400MHz above
      • Windows 2000/XP
      • USB 1.1/2.0 (with out USB-Hub)
      • 3.5inch Floppy Disk Drive


  • Instruction

    1. Preparation

      • Install software
          Driver install
        • Install Driver software

          Double click "DriverInstall.vbs". In case of Windows2000, ezusbw2k.inf will be installed to C:\winnt\inf, ezusb.sys, ezmon.sys will be installed to C:\winnt\system32\drivers. In case of WinXP, ezusbw2k.inf will be installed to C:Windows\inf, ezusb.sys, ezmon.sys will be installed to C:\Windows\system32\drivers.

        • Install EEPROM-Reader/Writer Software

          Copy to anyplace.

      • Install USB-board
        • USB board is connected to PC, after sotware installation.

          Attnetion:You must not connect adaptor cable at this timing.

        • Driver setting for USB board.

          After Connection of USB-board, you have to select driver location. In case of Windows2000, driver is existing in C:\winnt\inf. In case of WinXP, driver is existing in C:Windows\inf. Unfotunately, this driver does not certification from MicroSoft. However, you can continue.

    2. Power off ThinkPad

      You have to turn off as power of ThinkPad.

    3. Dis-assemble

      Dis-assemble Your ThinkPad.

    4. Check

      Check EEPRM location

    5. Soldering

      Carefully, Soldering EEPRM and adaptor cable. ThinkPad PCB

    6. Power on ThinkPad

      Turn on ThinkPad, soak until password input display appeared.

    7. Connection adaptor cable and USB-board

      Connection

    8. Start Software

      Start software as installed "STEP 1:".

    9. Read out EEPORM data.

      Press Read button of software for read out of EEPROM EEPROM-Read

    10. Analysis

      • For Professional Version: Display password.
      • For Standard Version: You have to save and analysis by your self.
      EEPROM-Decrypt

    11. Power off ThinkPad

      You have to turn off power of ThinkPad.

    12. Dis-soldering cable

      You remove cable of STEP-4.

    13. Assemble

      Assemble ThinkPad

    14. Power on ThinkPad

      Turn on Power ThinkPad.

    15. Input Password

      Input password which is gotten from STEP-10.


  • Price

    • For Profession user (as recycle shop and antique shop)

      Decypt routine is equipped. However, you have to show license from official.

      • Complete kit (400 Euro, W/O Shipping and Handling, Tax)
        • Software-EEPRM read out with decrypt routine.
        • USB Board
        • Adaptor cable

    • For standard user

      This sofware does not have decrypt routine. (only read out EEPROM contents.)

      • Complete kit (150 Euro. W/O Shipping and Handling, Tax)
        • Software-EEPROM read out without decrypt routine.
        • USB Board
        • Adaptor cable

    • Parts

      You can purchase each product. However, software can read out contents of EEPROM (W/O decrypt routine).

      • Software-EEPROM read out without decrypt routine. (50 Euro, distributed by E-mail)
      • USB Board (70 Euro, W/O Shipping and Handling, Tax)
      • Adaptor cable (40 Euro, W/O Shipping and Handling, Tax)

    • Data analysis service

      1. Read out EEPROM data by your self.
      2. Send e-mail to TeamKNOx.
      3. Check format your data.
      4. Notice correct data or not to you.
      5. You decide final decsion go/ no go this order.(Transmit charge)
      6. We sent analyzed data to you.

      • Data analysis service (30 Euro, distributed by E-mail)


  • Order

    Contact e-mail.


  • How to support for not supported model

    We can provide new support model for professioal as below.

    1. Customer
      1. Confirm EEPROM as 28RF08 on logic board of TP.
      2. Temporary purchase standard kit.
      3. Dump data from EEPROM with standard kit.
      4. Send EEPROM data.

    2. TeamKNOx
      1. Analysis dumped data.
        • #Free analysis in this case.(#Usually, 30Euro.)

      2. Fix software within your data.
      3. Provide diff. price as 250Euro.

        #Show us your professional license (as 2nd hand delaer and so on).


  • Attnetion

    We can not gurantee any accident or trouble for using our equipment. You have to do very precious soldering for installation. We can gurantee only our products working. You have to re-consider beforeordering. Thanks.


Top of Page
e-mail to Yuichi ODA


Copyright (C) 1998 - 2004 TeamKNOx